Online condition monitoring of misaligned meshing gears using wear debris and oil quality sensors

Abstract

PurposeThis paper aims to investigate the effect of misalignment on wear of spur gears and on oil degradation using online sensors.Design/methodology/approachThe misalignment effect on gears is created through a self-alignment bearing, and is measured using laser alignment system. Several online sensors such as Fe-concentration sensor, moisture sensor, oil condition sensor, oil temperature sensor and metallic particle sensor are installed in the gear test rig to monitor lubricant quality and wear debris in real time to assess gearbox failure.FindingsOffset and angular misalignments are detected in both vertical and horizontal planes. The failure of misaligned gear is observed at both the ends and on both the surfaces of the gear teeth. Larger-size ferrous and non-ferrous particles are traced by metallic particle sensor due to gear and seal wear caused by misalignment. Scanning electron microscope (SEM) images examine chuck, spherical and flat platelet particles, and confirm the presence of fatigue (pitting) and adhesion (scuffing) wear mechanism. Energy-dispersive X-ray spectroscopy analysis of SEM particles traces carbon (C) and iron (Fe) elements due to gear failure.Originality/valueGear misalignment is one of the major causes of gearbox failure and the lubricant analysis is as important as wear debris analysis. A reliable online gearbox condition monitoring system is developed by integrating wear and oil analyses for misaligned spur gear pair in contact.