Abstract
In order to meet the requirements of high energy density as well as high power performance, a worldwide effort has been made to develop novel high-performance electrode materials to keep pace with the fast increasing market demands. Various compounds that form intermetallic phases (so-called “alloys”) with lithium have been proposed as alternative anode materials, such as silicon (Si) [1-2], tin (Sn) [3] and germanium (Ge) [4]. Compared to Si, less attention has been paid so far on Ge due to its higher costs. Nevertheless, its good lithium diffusivity (400 times higher than in silicon) and high electronic conductivity (ca. 104 times higher than silicon) enable it as a promising anode material for the next-generation LIBs. Currently, researchers report on different structures of Ge-based materials, such as nanotubes [5], nanowires [6], porous structures [7] and Ge-based composite materials [4]. So far, only a few studies focus on GeO2 as anode material. GeO2 is of interest for application as negative electrode material due to its high theoretical reversible capacity (1125 mAh g-1 based on 4.25 mol Li per mol Ge), low operation voltage (0.7 V to 0 V vs. Li/Li+) and higher thermal stability compared to Ge.[8] The reaction of GeO2 with Li involves two steps: 1) GeO2 + 4Li à Ge + 2Li2O; 2) xLi + Ge ⇌ LixGe (x ≤ 4.25). While the first reaction can be considered as to a large part electrochemically irreversible, resulting in a large irreversible charge loss by formation of Li2O, the lithiation/de-lithiation reaction in step 2) can be regarded as reversible, providing the discharge capacity of GeO2. The high irreversible capacity during the first lithiation process is also well-known for SnO2-based anodes and is one of the main reasons hindering so far the application in commercial lithium-ion batteries.[9] In general, the synthesis of GeO2 can be achieved by different methods, including hydrolysis reactions from a Ge precursor, chemical vapor deposition (CVD) and sputter processes. In this work, novel mesoporous three-dimensional GeO2 was successfully synthesized by a facile one-step synthesis method followed by mixing with graphene using a spray drying process. The as-prepared GeO2 shows a bean-like morphology with a particle size of 400 to 500 nm in length and 200 to 300 nm in diameter (Figure 1a-d). In a further step, we take the advantages of graphene (low-dimensional carbon material with high electronic conductivity; excellent mechanical properties; graphene can contribute to the capacity) to further enhance the electrochemical performance of b-GeO2. As illustrated in Figure 2, it can be clearly observed that the GeO2 particles are tightly anchored on or wrapped within the graphene sheets. Notably, during the mixing process, GeO2 particles are still homogenously dispersed within or firmly encapsulated by the graphene sheets. The b-GeO2 without any additional conductive surface layer shows a high reversible capacity for lithium storage of 845 mAh g-1 after 100 cycles, with nearly no capacity fading. When graphene was employed to be mixed with GeO2 via a spray drying method, the electrochemical performance is further significantly improved. The b-GeO2/graphene composite electrode gives a higher de-lithiation capacity of 1,021 mAh g-1 for 200 cycles at 0.2C and a high rate capability of up to 5C. This superior electrochemical performance benefits from its uniformly dispersed mesoporous structure, in which the GeO2 particles are homogeneously distributed on or within the conductive graphene sheets. Figure 1. Low-resolution (a, b) and high-resolution-resolution (c, d) SEM images of b GeO2. Figure 2. (a, b) SEM images of the b-GeO2/graphene composite prepared by spray drying method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.