One-step anodization fabrication and morphology characterization of porous AAO with ideal nanopore arrays

Abstract

A fabrication method for one-step anodization of an anodic aluminum oxide (AAO) template with nanopore arrays using pretreated high purity aluminum foil is reported in this article. Morphology of the AAO was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Results showed that porous AAO with ideal nanopore arrays can be fabricated by one-step anodization fabrication technology on high purity aluminum foil which had been anodized at 45 V direct current (DC), in 0°C, 0.5 M H2C2O4 solution for 48 hours. The average pore diameter and the interpore distance were 80 nm and 120 nm, respectively. Nanopores in porous AAO had very narrow size distribution and were arranged into hexagonal array. The formation mechanism of nanopore arrays in porous AAO is discussed. Porous AAO with ideal nanopore arrays provide an ideal template for preparation of many one-dimensional nanomaterials. One-step anodization of AAO is a simpler procedure and more applicable in industrial application than the previous two-step anodization technology.