One-dimensional turbulence modeling of compressible flows: II. Full compressible modification and application to shock–turbulence interaction

Abstract

One-dimensional turbulence (ODT) is a simulation methodology that represents the essential physics of three-dimensional turbulence through stochastic resolution of the full range of length and time scales on a one-dimensional domain. In the present study, full compressible modifications are incorporated into ODT methodology, based on an Eulerian framework and a conservative form of the governing equations. In the deterministic part of this approach, a shock capturing scheme is introduced for the first time. In the stochastic part, one-dimensional eddy events are modeled and sampled according to standard methods for compressible flow simulation. Time advancement adjustments are made to balance comparable time steps between the deterministic and stochastic parts in compressible flows. Canonical shock–turbulence interaction cases involving Richtmyer–Meshkov instability at Mach numbers 1.24, 1.5, and 1.98 are simulated to validate the extended model. The ODT results are compared with available reference data from large eddy simulations and laboratory experiments. The introduction of a shock capturing scheme significantly improves the performance of the ODT method, and the results for turbulent kinetic energy are qualitatively improved compared with those of a previous compressible Lagrangian ODT method [Jozefik et al., “Simulation of shock–turbulence interaction in non-reactive flow and in turbulent deflagration and detonation regimes using one-dimensional turbulence,” Combust. Flame 164, 53 (2016)]. For the time evolution of profiles of the turbulent mixing zone width, ensemble-averaged density, and specific heat ratio, the new model also yields good to reasonable results. Furthermore, it is found that the viscous penalty parameter Z of the ODT model is insensitive to compressibility effects in turbulent flows without wall effects. A small value of Z is appropriate for turbulent flows with weak wall effects, and the parameter Z serves to suppress extremely small eddy events that would be dissipated instantly by viscosity.