On understanding the mechanical properties and damage behavior of Cf/SiC composites by indentation method

Abstract

Carbon fiber reinforced silicon carbide ceramic matrix (Cf/SiC) composites have the advantages of high temperature resistance, wear resistance, low density, high hardness as well as specific strength. They have been applied extensively in hot-end components of aerospace and braking systems of trains. Nevertheless, grappling with the anisotropy, non-homogeneity, and weak interlayer bonding of Cf/SiC composites presents a major challenge for achieving efficient and low-damage processing. This paper is primarily intended to investigate comprehensively the mechanical properties and damage behavior of Cf/SiC composites by nanoindentation and Vickers indentation tests. The behaviors of indentation damage on the longitudinal section of fiber (LSF), the cross-section of fiber (CSF) and matrix under different loads and the deflection mechanism of matrix crack were analyzed. The findings reveal a pronounced anisotropy between the radial and axial orientations of the fiber, and plastic deformation exists in the matrix. Furthermore, the matrix has the largest hardness and elastic modulus, while the LSF displays the lowest values among the composites. The main forms of indentation damage on the LSF are fiber crack, fiber peel off, fiber cocked up and squamous crack. The main manifestations of indentation damage on CSF are fiber crushing and fiber debonding, with the total surface damage area being comparatively limited. The fiber orientation and interface are influential factors in the crack propagation path of matrix. Notably, the fibers effectively inhibit the crack propagation of the matrix. This investigation provides valuable theoretical guidance for the formation mechanism and suppression strategy of machining damage in Cf/SiC composites.