Abstract
The permanent magnetic bearing and the small-sized hydrodynamic spiral groove bearing are utilized as supports for the rotor of the energy storage flywheel system. The hydrodynamic bearing and the squeeze film damper do not need the oil cycle to remove the heat caused by friction because the friction loss is small. The linear dynamics model with four degrees of freedom is built to describe the vibration of the flywheel rotor-bearing system. The squeeze film dampers show good behavior in suppressing the vibration and improving the stability of the rotor-bearing system. The analytical solution of the dynamic characteristic coefficients of the squeeze film is achieved from Reynolds equation after some simplifications are taken. The numerical computation shows that the moment unbalance excites larger vibration of the rotor than the force unbalance. The upper damper plays an important role in helping the rotor pass its critical speed. The damping coefficient of the squeeze film dampers should be selected carefully. The flywheel arrived at the speed of 39,000 rpm and stored the energy of 308 Wh in the experiment. The calculated unbalance response is compared to the test response of the rotor storing quantities of kinetic energy. The comparison indicates that the dynamics model of the rotor-bearing-damper system is appropriate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
