Abstract

AbstractThe burning rate of solid propellants is an important factor for optimizing rocket motors and improving performance. The enhanced burning rate can increase thrust and reduce a propulsion system‘s overall size and weight. In this study, a novel nano‐aluminum/THV composite additive was prepared and introduced into a solid ammonium perchlorate/polybutadiene composite solid rocket propellant to enhance its burning rate. The morphology of the composite particle additive and its effects on combustion were characterized. The use of small quantities (<15 wt.%) of the additive resulted in a burning rate enhancement of up to 2.1 times that of the conventional coarse aluminized propellant with a specific impulse loss of only 3 seconds, and as much as 4.7 times enhancement with a predicted loss of 22 seconds in theoretical specific impulse. Some of this loss may be recovered by the improved combustion efficiency in smaller rocket motors because the additive was shown to significantly reduce the aluminum agglomeration at the propellant burning surface and reduce the size of reaction products which may reduce two‐phase flow losses. The additive also provides wide burning rate tailorability, favorable for motor, grain, and thrust curve design. The burning rate enhancement mechanism is thought to be a physical cratering mechanism governed by the burning rate disparity between the binder/oxidizer system and the nano‐aluminum/fluoropolymer additive and not a chemical catalytic effect.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call