On the Usage of Battery Equivalent Series Resistance for Shuntless Coulomb Counting and SOC Estimation

Abstract

In this paper, a feasibility study of a shuntless coulomb counting method for estimating the state of charge (SOC) of a battery is presented. Contrary to conventional coulomb counting, the proposed method does not require an external resistive shunt; it instead only requires voltage measurements performed on the battery under test while it is operating. The current is measured indirectly using the battery’s equivalent series resistance (ESR). The method consists of a preliminary calibration phase where the ESR and the open-circuit voltage of the battery are measured for different SOCs and stored in look-up tables (LUTs). Then, in the subsequent operational phase, the method uses these LUTs together with the measured voltage at the battery terminals to estimate the SOC. The performance of the proposed method is evaluated on a sample lithium polymer (LiPo) battery, using a realistic current profile derived from the Worldwide Harmonized Light-Duty Vehicles Test Procedure (WLTP). The results of this experimental evaluation demonstrate a SOC estimation root-mean-square error of 0.82% and a maximum SOC error of 1.45%. These results prove that the proposed method is feasible in a practical scenario.