Abstract
In this work a novel MEMS based variable capacitor has been presented. To increase the tunability and decrease the applied voltage, the conventional fixed-fixed beam used in CPW lines has been changed to a fixed-simple supported beam. The proposed structure is a simple cantilever micro-beam in the first step of deflection and is changed to a fixed-simple supported micro-beam in the second step of motion. In the capacitive micro-structures increasing the applied voltage decreases the equivalent stiffness of the structure and leads the system to an unstable condition by undergoing to a saddle node bifurcation. In the proposed structure to avoid pull-in instability and increase the capacitance tuning range, mechanical stiffness of the structure is increased by changing boundary conditions by locating a pedestal in the end of the cantilever beam. The governing nonlinear equation for static deflection of the micro-beam, based on Euler–Bernoulli micro-beam theory has been presented. The results show that the proposed structure increases the capacitance tuning range and decreases the applied voltage. The results also show that the position of the pedestal affects the tunability and the threshold voltage of the structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.