Abstract
Abstract. The Site Selection Act stipulates a precautionary temperature limit of 100 ∘C on the outer surface of the containers with high-level radioactive waste (HLRW) in the final disposal site. This precautionary temperature limit should be applied in preliminary safety analyses provided that the maximum physically possible temperatures in the respective host rocks have not yet been determined due to pending research. Increasing temperatures in the deep geological underground, caused by the heat generation of the HLRW, can trigger thermal, hydraulic, mechanical, chemical and biological processes (THMCB) in the respective host rocks of a final disposal site and thus endanger safety. Furthermore, high temperatures may hamper the feasibility to retrieve and recover HLRW from a final disposal site. Such processes are described in detail in databases for features, events and processes (FEP) databases. Single components or barriers of a final disposal facility may require specific design temperatures for the preservation of their features once a concept for long-term safety of a final disposal site is established; however, the interactions of all relevant processes of a concept for a final disposal site must be considered when a specific temperature limit for the outer surface of the containers is derived. This temperature limit may vary for particular safety and final disposal concepts in the host rock: salt, clay and crystalline rock. The conclusion is that temperature limits regarding the outer surface of the containers should be derived specifically for each safety and disposal concept and should be supported by a solid safety analysis. Temperature limits without reference to specific safety concepts or the particular design of the final disposal site likely narrow down the possibilities for optimisation and could adversely affect the site selection process in finding the best suitable site.
Highlights
Single components or barriers of a final disposal facility may require specific design temperatures for the preservation of their features once a concept for long-term safety of a final disposal site is established; the interactions of all relevant processes of a concept for a final disposal site must be considered when a specific temperature limit for the outer surface of the containers is derived
The Site Selection Act stipulates a precautionary temperature limit of 100 ◦C on the outer surface of the containers with high-level radioactive waste (HLRW) in the final disposal site. This precautionary temperature limit should be applied in preliminary safety analyses provided that the maximum physically possible temperatures in the respective host rocks have not yet been determined due to pending research
High temperatures may hamper the feasibility to retrieve and recover HLRW from a final disposal site. Such processes are described in detail in databases for features, events and processes (FEP) databases
Summary
Single components or barriers of a final disposal facility may require specific design temperatures for the preservation of their features once a concept for long-term safety of a final disposal site is established; the interactions of all relevant processes of a concept for a final disposal site must be considered when a specific temperature limit for the outer surface of the containers is derived.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
