Abstract
ABSTRACTThe 433 MHz band is gaining relevance as an alternative to the 2.4 GHz band for machine‐to‐machine communications using low‐power wireless technologies. Currently, two standards are being developed that use the 433 MHz band, DASH7 Mode 2 and IEEE 802.15.4f. The article presents propagation models based on measurements conducted at the 433 MHz and 2.4 GHz bands that can be used for link budget calculations in both outdoor and indoor environments depending on node height. The results obtained show that the 433 MHz band has a larger communication range in both indoor and outdoor environments despite the negative effects of having a larger Fresnel zone. In addition, indoor propagation measurements are conducted in line‐of‐sight and nonline‐of‐sight conditions to determine the suitability of channel hopping to combat the effects of multipath propagation. Contrary to the 2.4 GHz band, the results show that channel hopping at 433 MHz does not provide any link robustness advantage because the channel coherence bandwidth is larger than the whole band bandwidth, and thus, all channels are highly correlated. Copyright © 2013 John Wiley & Sons, Ltd.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions on Emerging Telecommunications Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
