On the strength and fracture toughness of an additive manufactured CrCoNi medium-entropy alloy

Abstract

An additively manufactured (nominally equiatomic) CrCoNi alloy was processed by laser powder bed fusion (LPBF). At ambient temperatures (298 K), this medium-entropy alloy displayed a yield strength, σy of ∼691 ± 9 MPa, and an ultimate tensile strength, σu of ∼926 ± 15.2 MPa; at cryogenic temperatures (77 K), yield and tensile strengths increased respectively to σy ∼ 944 ± 6 MPa and σu ∼ 1382 ± 11 MPa. These strength levels are 57 and 44% higher than that of the wrought alloy, due to strengthening from the solidification cellular structures intertwined with dislocations in the LPBF CrCoNi. The crack-initiation fracture toughness, KJIc was measured to be ∼183.7 ± 28 MPa√m at 298 K; this value marginally decreased by ∼4% to ∼176 ± 11 MPa√m at 77 K. These KJIc values of the LPBF CrCoNi were 11% and 35% lower than the wrought CrCoNi alloy at 298 K and 77 K, respectively. The resistance to crack growth of the LPBF CrCoNi from its hierarchical micro- and meso‑structures was evaluated using nonlinear-elastic fracture mechanics by measuring R-curve behavior in the form of the J-integral as a function of crack extension. The specific features of the hierarchical microstructures at different length-scales provide a basis for the strengthening and toughening properties of this additively manufactured medium-entropy alloy. This correlation between the deformation and the hierarchical microstructures at different length-scales may provide future guidance for improving the fracture toughness properties of medium-entropy alloys.