Abstract

The large-scale integration of intermittent distributed energy resources has led to increased uncertainty in the planning and operation of distribution networks. The optimal flexibility dispatch is a recently introduced, power flow-based method that a distribution system operator can use to effectively determine the amount of flexibility it needs to procure from the controllable resources available on the demand side. However, the drawback of this method is that the optimal flexibility dispatch is inexact due to the relaxation error inherent in the second-order cone formulation. In this paper we propose a novel bi-level optimization problem, where the upper level problem seeks to minimize the relaxation error and the lower level solves the earlier introduced convex second-order cone optimal flexibility dispatch (SOC-OFD) problem. To make the problem tractable, we introduce an innovative reformulation to recast the bi-level problem as a non-linear, single level optimization problem which results in no loss of accuracy. We subsequently investigate the sensitivity of the optimal flexibility schedules and the locational flexibility prices with respect to uncertainty in load forecast and flexibility ranges of the demand response providers which are input parameters to the problem. The sensitivity analysis is performed based on the perturbed Karush–Kuhn–Tucker (KKT) conditions. We investigate the feasibility and scalability of the proposed method in three case studies of standardized 9-bus, 30-bus, and 300-bus test systems. Simulation results in terms of local flexibility prices are interpreted in economic terms and show the effectiveness of the proposed approach.

Highlights

  • We compare the results in terms of (i) the second-order cone (SOC)-relaxation error [eSOC, as defined in Equation (19)], (ii) the DER

  • For Case 3, this figure is reduced by an average of 89% when compared with the results of second-order cone optimal flexibility dispatch (SOC-optimal flexibility dispatch (OFD)) model

  • The OFD is an optimal power flow-based method that enables the distribution system operator (DSO) to determine the amount of flexibility that it needs to dispatch from flexible resources to meet its operational constraints

Read more

Summary

Introduction

One way to overcome the uncertainty is to increase flexibility in the distribution system by harnessing the flexibility that is available to the end users by implementing demand response (DR) programs. Regardless of the mechanism considered in place, the distribution system operator (DSO) needs to become active in network management by taking a coordinating role through implementing a proper policy that provides an adequate price or command signal. This for one, would enable the DSO to harness the flexibility from DR providers and overcome the challenges related to uncertainty

Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call