Abstract
The influence of the deposition parameters temperature, gas pressure, gas phase composition and r.f. frequency on the mechanical properties of silicon nitride layers prepared by plasma-enhanced deposition was investigated. The results are related to film composition and density, as derived from Rutherford backscattering spectrometry, Auger electron spectroscopy and IR measurements. In addition, etch rate measurements (in buffered hydrofluoric acid at 25°C) were performed. It appears that layers deposited at low temperatures (less than 550°C) and at low frequencies (less than 4 MHz) show a compressive stress while layers deposited at higher temperatures exhibit a tensile stress. Layers deposited at low temperatures and high frequencies (more than 4 MHz) show a tensile stress behaviour. A simplified deposition model is proposed in order to explain the experimental data. In this model the large difference in hydrogen content and density between layers deposited at different r.f. frequencies and temperatures is attributed to the influence of ion bombardment on the hydrogen desorption rate and on the short-range order in the plasma nitride layer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
