Abstract
The predictive capabilities of the shear-modified Gurson model [Nielsen and Tvergaard, Eng. Fract. Mech. 77, 2010] and the Modified Mohr–Coulomb (MMC) fracture model [Bai and Wierzbicki, Int. J. Fract. 161, 2010] are evaluated. Both phenomenological fracture models are physics-inspired and take the effect of the first and third stress tensor invariants into account in predicting the onset of ductile fracture. The MMC model is based on the assumption that the initiation of fracture is determined by a critical stress state, while the shear-modified Gurson model assumes void growth as the governing mechanism. Fracture experiments on TRIP-assisted steel sheets covering a wide range of stress states (from shear to equibiaxial tension) are used to calibrate and validate these models. The model accuracy is quantified based on the predictions of the displacement to fracture for experiments which have not been used for calibration. It is found that the MMC model predictions agree well with all experiments (less than 4% error), while less accurate predictions are observed for the shear-modified Gurson model. A comparison of plots of the strain to fracture as a function of the stress triaxiality and the normalized third invariant reveals significant differences between the two models except within the vicinity of stress states that have been used for calibration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have