Abstract
Urban wind energy has intrigued some investments and applications over the last decade. However, most applications have been unsuccessful, in many cases leaving behind non-rotating wind turbines in the built environment. Research on urban wind energy has also lacked in providing a reliable description of the local flow features small wind turbines are placed in, and the positioning strategy is mostly based on empiricism. This study uses data from a wind tunnel test on the flow pattern above the roof of high-rise buildings to estimate the potential yield of small wind turbines installed in various configurations. The data are collected at a height of 12 m above the flat roof under various wind directions. The capacity factor of a medium-size horizontal axis wind turbine is calculated using power curve data available from the literature. The local wind resource is calculated using the mean wind speed as measured with hot-wire anemometry. The annual energy production of the various configurations is calculated using the climate data available for Firenze (IT) and the orientation of the building with respect to main winds. A rather large variability in the power output of the roof-farm was found for the chosen configuration.
Highlights
Urban Wind Energy is a niche of wind energy aiming at harvesting the wind resource in the built environment
In order to study the wind energy resource a different setup would be needed. Still, such data are not available as it is difficult to justify the expenditure of a field test campaign to measure the wind resource on top of buildings basing on the current performance of urban wind energy applications [1,3]
In the same set of wind tunnel experiments, the results presented in [7] have shown that
Summary
Urban Wind Energy is a niche of wind energy aiming at harvesting the wind resource in the built environment. There are essentially two reasons for this debacle: the wind energy resource on buildings is an area of knowledge yet to be explored and the performance of wind turbines in highly turbulent environments is mostly unknown. In order to study the wind energy resource a different setup would be needed (wind tunnel or numerical results using full-scale data). Still, such data are not available as it is difficult to justify the expenditure of a field test campaign to measure the wind resource on top of buildings basing on the current performance of urban wind energy applications [1,3]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
