On the modelling of ground-board mounted microphones for outdoor noise measurements

Abstract

This paper presents a boundary element method for calculating the sound pressure level on and above a ground-board placed on an infinite ground plane with constant impedance. This method uses the Green's function for the Helmholtz equation in a half-space bounded by an infinite impedance plane and therefore avoids the complications which occur when modeling the ground as a finite impedance plane (which results in diffraction from the edges of the ground plane). Two formulations are presented: the first one models a finite thickness ground-board, whilst the second one models a zero-thickness ground-board with the upper surface coplanar with the ground plane. The method is validated against an equivalent finite element method simulation and example calculations are presented for typical ground-board designs used for outdoor noise measurements on different ground impedance planes and incidence angles. It is shown that the sound pressure level on the upper surface of a ground-board placed on a non-rigid ground can vary significantly and that this variation is dependant on the ground impedance, angle of incidence and frequency. These findings are consistent with previous investigations and highlight the fact that noise measurements made using ground-board mounted microphones on a non-rigid ground are dependant on the impedance of the surrounding ground surface. The method presented in this paper could be used to develop corrections to straightforwardly account for this effect.