On the matrix cracking stress and the redistribution of internal stresses in brittle-matrix composites

Abstract

A concept is proposed to increase the matrix cracking stress of some brittle-matrix composites by taking advantage of the redistribution of internal stresses that occurs when a composite with phases that have dissimilar creep behavior is subjected to thermomechanical loading. The concept is elaborated through the stress analysis of a model unidirectional composite with constituents that exhibit linear viscoelastic behavior. It is shown that if a composite with a matrix that is less creep resistant than the fibers is subjected to a treatment involving both thermal and mechanical loading (e.g. creep test), stresses can be transferred from the matrix to the fibers, resulting in the stress–relaxation of the matrix. Furthermore, it is also shown that by the elastic recovery of the fibers, the matrix can be subjected to large compressive residual stresses at the end of the treatment. The conditions for the viability of this concept and the implications of fiber overloading and potential loss of composite-like behavior are discussed.