On the lubrication characteristics of piston ring under different engine operation conditions

Abstract

PurposeCurrently, lubrication analysis of piston ring is generally done under engine rated operating condition. However, the engine (such as the vehicle engine) does not always operate in rated operating condition, and its operating condition changes frequently in actual use. In addition, the lubrication status of piston ring is generally assumed as the flooded lubrication or a certain form of poor lubrication in most of the lubrication analysis.Design/methodology/approachIn this paper, based on the equations about the flow rate of lubricating oil and the variation of control volume, the flow model of lubricating oil in the piston ring-cylinder liner conjunction is established. The lubrication analysis of piston ring for a four-stroke engine under different engine operating conditions is done, in which the lubricating oil at the inlet of piston ring is considered as the lubricating oil attached on the relevant location of cylinder wall after the piston ring moves over at the previous stroke.FindingsThere is remarkable difference for the lubrication characteristics of the piston ring under different engine operating conditions. The worst lubrication status of piston ring may not take place under engine rated operating condition.Originality/valueIn this paper, based on the measured engine cylinder pressure, the lubrication analysis of piston ring for a four-stroke engine under different engine operating conditions is done in which the lubricating oil supply condition at the inlet of piston ring is considered. The results of this paper are helpful for the design and research of engine piston ring-cylinder liner conjunction.