On the fracture toughness of ceramic matrix composites

Abstract

Based on the resistance curve (R-curve) behaviour of ceramic matrix composites (CMCs) determined under either quasi-static or cyclic loading, the crack-face fibre bridging stress field is determined for the compact tension (CT) test specimen geometry. Two different methods have been used for the analysis of the bridging stresses. The first considers a compliance approach. Using the difference in compliance calibration curves with and without bridging and assuming a power-law relation between bridging stress and crack opening displacement, the bridging stress field was calculated. The second approach uses the existence of an invariant stress reversal point in the CT geometry and assuming that the material exhibits linear elastic fracture behaviour, yields a recurrence relation for the bridging stresses resulting in a piece-wise constant stress function. Both models are applied to the experimentally determined fracture behaviour of a 2D carbon/carbon (C/C) composite, and the resulting bridging stress distributions are discussed.