Abstract
The top-mounted pitching point absorber is one of the most promising wave energy converters in that it can be easily attached to an existing offshore structure. However, it is difficult to predict accurately its energy conversion performance because of the strongly nonlinear hydrodynamic behaviour. Herein, smoothed particle hydrodynamics (SPH) is used to solve this wave-structure interaction problem. The SPH method is first validated against free surface deformation measurements obtained from a wedge water entry experiment. SPH simulations of regular wave interaction with fixed and freely pitching devices agree well with measured data, providing confidence in the prediction of power conversion performance. Absorbed power and capture width ratio exhibit uni-modal behaviour with wave period. The wave period of peak power within this distribution increases with PTO damping. According to the observed scaling behaviour with device scale, an optimally damped larger scale device is effective at absorbing energy from incident waves of longer wavelength. In finite deep water, the larger device achieves higher efficiency compared with the smaller ones, and its peak efficiency at 2πh/λ=1.1 provides reference for siting.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
