On the Correct Measurement of Application Memory Bandwidth and Memory Access Latency

Abstract

Diagnosing if an application suffers from DRAM contention can be a challenging task. One method is to compare the hardware memory bandwidth limit with the measured memory bandwidth of an application. Another method is based on memory access latency. The latency of a DRAM access in an uncontended state is a hardware characteristic. If an application shows higher DRAM access latency, the increase comes from queuing delays and the application is limited by DRAM bandwidth. Hardware-based measurement of the application's latency and bandwidth can be done with low-overhead and is agnostic of the application's implementation.But the practical implementation of such a diagnosis system on CPUs is difficult. In modern CPUs, there is an abundance of performance counters and only superficial documentation. Different types of counters for bandwidth or latency, that seemingly measure the same thing, produce different results. There is no in-depth understanding of those performance counters and naive usage may lead to incorrect measurements. Because there is no hardware feature to measure DRAM access latency directly, the implementation of the above-mentioned latency based method may seem impossible.In this paper, we compare various hardware latency and bandwidth measurement methods on CPUs by using micro-benchmarks. We show results of Intel Haswell, Broadwell and Skylake systems. With our experiments, we show how and why performance counters for bandwidth and latency differ. Only the counters inside of the memory controller correctly measure bandwidth. Latency measured by instruction sampling is suitable to find DRAM contention, even though it is not a pure DRAM access latency.