On the characterization of materials and masonry walls of historical buildings: Use of optical system to obtain displacement maps in double-flat jack tests

Abstract

Among the testing techniques aiming at the mechanical characterization of masonry, the double flat-jack testing method is widely adopted to identify the local value of significant parameters needed to perform structural analyses, such as elastic modulus, Poisson’s ratio and compressive strength. The experience gained from many applications has allowed not only to collect experimental data concerning different types of masonry, but also to highlight the difficulty in the interpretation of the results and the limitations of both single and double flat-jack tests. Although the accuracy of the flat-jack technique in detecting strength and deformability behavior of masonry is still debated in the technical literature and practical activities, changes in the testing procedure aiming at ascertaining the validity of the test results have not been formally defined yet. After a brief description of the standard test procedure and its uncertainties, the present paper proposes an upgrade of the test procedure for improving the level of reliability of the test results. In particular, an experimental case study related to a historical brick masonry building located in Italy is presented to point out the additional information necessary to validate the results of the testing process.