Abstract

Objectives. The aim of the study isto assess the influence of concrete deformation properties during the restoration and (or) reinforcement of reinforced-concrete sections using repair compounds. Methods. In the study, a method of calculation of the load-carrying capacity of concrete sections is used according to a non-linear deformation model using diagrams of concrete deformation, taking into account the influence of the confinement effect and prescription factors on the deformation properties of concrete. Deformation diagrams are constructed for short-term loading of concrete of various classes, taking into account the possible change in its deformation properties due to its structural features (e.g. fine- grained) and the presence of modifying additives (repair concrete) in its the composition. Results. The increase in the load-bearing capacity of a section with its total area unchanged is not directly proportional to the area of the reinforced concrete. The increase in the loadbearing capacity of the section is not directly proportional to the increase in the class of concrete reinforcement. Increasing the confinement coefficient from 1.3 to 1.5 provides an increase in the loadbearing capacity of the section from 15.5% to 58%. An increase in the elastic modulus of repair concrete by 1.5 times leads to an increase in the load-bearing capacity of the section from 19% to 50%. While keeping sectional value and reinforcement factor constant, the use of repair concrete makes it possible to increase the bearing capacity of the section under consideration from 1.07 to 2.25. Conclusion . The calculation of the strength of reinforced concrete elements reinforced with repair compounds according to the nonlinear deformation model allows the stress-strain state (SSS) – and, consequently, the bearing capacity after the reinforcement – to be estimated more accurately, while the choice of the repair compound depends on the deformation properties of the “old” concrete.

Highlights

  • The aim of the study isto assess the influence of concrete deformation properties during the restoration and reinforcement of reinforced-concrete sections using repair compounds

  • A method of calculation of the load-carrying capacity of concrete sections is used according to a non-linear deformation model using diagrams of concrete deformation, taking into account the influence of the confinement effect and prescription factors on the deformation properties of concrete

  • Deformation diagrams are constructed for short-term loading of concrete of various classes, taking into account the possible change in its deformation properties due to its structural features and the presence of modifying additives in its the composition

Read more

Summary

Introduction

A method of calculation of the load-carrying capacity of concrete sections is used according to a non-linear deformation model using diagrams of concrete deformation, taking into account the influence of the confinement effect and prescription factors on the deformation properties of concrete. Наращиванием сечения, в этом случае геометрические параметры ремонтного слоя должны обеспечивать размещение (при необходимости) дополнительной арматуры, а прочностные и деформационные свойства бетона следует принимать с учетом НДС конструкции и свойств «старого» бетона.

Objectives
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.