On the anisotropic fracture behaviour of AA2050-T84 thick plate

Abstract

Anisotropy in the fracture behaviour of AA2050-T84 was investigated using 2D digital image correlation (DIC)-assisted 3-point bending fracture toughness test on specimens with crack propagation direction oriented along the normal direction (ND) and rolling direction (RD). The tensile properties along the RD indicated slightly higher yield strength (482 ± 8 MPa) than ND sample (469 ± 9 MPa), while the fracture toughness in terms of energy release rate was higher when the notch was oriented along the ND (35.3 ± 1 kJ/m2) compared to the RD (18.5 ± 0.9 kJ/m2). Fractography of the fractured surfaces and detailed electron backscatter diffraction (EBSD) analysis of the microstructure along crack paths unveiled higher crack tortuosity with extensive secondary cracking in the TD-ND specimen than in the TD-RD. DIC measurements clearly showed a larger deformation zone for the TD-ND specimen also as which corroborated the plastic zone size determined using linear elastic fracture mechanics (LEFM). Additionally, the crystallographic model of tilt and twist angle differences between the neighbouring grains was employed to explain the increase in crack path tortuosity and higher dissipation of plastic work contributing to superior fracture toughness for the TD-ND sample.