Abstract
The electrochemical spark machining (ECSM) process has been proved as a potential process for machining of low machinability high-strength electrically non-conducting materials, but the mechanism of material removal during the process, by and large, is not yet understood. In the present work, the electrochemical discharge is modelled as a phenomenon similar to that which occurs in arc discharge valves. This phenomenon is used to explain various experimental results, on the basis of circuit and arc discharge valve characteristics. The spark energy and the approximate order of hydrogen gas bubble diameter are computed by the proposed valve theory. Material removal rate is evaluated by modelling the problem as a 3-D unsteady state heat conduction problem. The problem is solved by the finite element method to compute the temperature distribution which is post-processed for estimating material removal per spark, overcut obtained in the machined cavity, and attainable maximum penetration depth. The conclusion drawn is that the application of valve theory to the ECSM process seems to be realistic. Estimated material removal rate, overcut and maximum penetration depth show a good agreement with experimental findings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have