Abstract

This paper examines the impact of the characterisation technique considered for the determination of the solid state diffusion coefficient in uncycled as in cycled Nickel Manganese Cobalt oxide (NMC) electrodes. As major characterisation techniques, Cyclic Voltammetry (CV), Galvanostatic Intermittent Titration Technique (GITT) and Electrochemical Impedance Spectroscopy (EIS) were systematically investigated. diffusion coefficients during the lithiation process of the uncycled and cycled electrodes determined by CV at 3.71 V are shown to be equal to cm·s and cm·s , respectively. The dependency of the diffusion with the lithium content in the electrodes is further studied in this paper with GITT and EIS. Diffusion coefficients calculated by GITT and EIS characterisations are shown to be in the range between cm·s and cm·s, while demonstrating the same decreasing trend with the lithiation process of the electrodes. For both electrode types, diffusion coefficients calculated by CV show greater values compared to those determined by GITT and EIS. With ageing, CV and EIS techniques lead to diffusion coefficients in the electrodes at 3.71 V that are decreasing, in contrast to GITT for which results indicate increasing diffusion coefficient. After long-term cycling, ratios of the diffusion coefficients determined by GITT compared to CV become more significant with an increase about 1 order of magnitude, while no significant variation is seen between the diffusion coefficients calculated from EIS in comparison to CV.

Highlights

  • Batteries are essential components of our daily lives, whether it is in mobile phones, in portable computers, for starting the car engine or for powering the satellite that sends radio communication signals down to earth [1,2,3]

  • For uncycled and cycled electrodes, diffusion coefficients calculated from Cyclic Voltammetry (CV) show greater values compared to those determined by Galvanostatic Intermittent Titration Technique (GITT) and Electrochemical Impedance Spectroscopy (EIS)

  • Ratios of the diffusion coefficients from GITT compared to CV become more significant with an increase about 1 order of magnitude, while no significant variation due to ageing is seen between the diffusion coefficients from EIS in comparison to CV

Read more

Summary

Introduction

Batteries are essential components of our daily lives, whether it is in mobile phones, in portable computers, for starting the car engine or for powering the satellite that sends radio communication signals down to earth [1,2,3]. Electric vehicles (EVs) including hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs) and pure battery electric vehicles (BEVs) are predicted to dominate the vehicle market [4,5]. Understanding the behaviour of the internal degradation mechanisms occurring due to long term cycling of these batteries and their electrodes is critical [6,7]. Lithium Nickel Manganese Cobalt (NMC) for use in positive electrodes eventually offered improved cycle life, thermal stability and energy density capabilities for lithium-ion batteries [12,13,14,15].

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.