On-Surface Self-Assembly of Stimuli-Responsive Metallo-Organic Films: Automated Ultrasonic Spray-Coating and Electrochromic Devices.

Abstract

We demonstrate the on-surface formation of homogeneous and uniform electrochromic films via ultrasonic spray coating. This fully automated process is capable of fabricating metallo-organic films on transparent conducting oxides (TCOs) on glass or flexible poly(ethylene terephthalate) (PET) with surface areas of up to 36 cm2 and film thicknesses of half a micron. The assembly process involves alternatingly spray-coating dilute solutions of structurally well-defined iron polypyridyl ([Fe(mbpy-py)3]2+) complexes and bis(benzonitrile)palladium dichloride (Pd(PhCN)2Cl2) onto conductive substrates, where the latter palladium salt was used as the inorganic cross-linker. The on-surface self-assembled three-dimensional networks are intensely colored and were subsequently integrated into laminated electrochromic devices (ECDs) containing a lithium-based gel electrolyte. The ECDs retain their intense color in the ground state, having a Δ Tmax of 40-49% at λmax ≈ 600 nm, and can be operated for up to 1500 redox cycles. The fluorine-doped tin oxide counter electrode coated with poly(3,4-ethylene-dioxythiophene)polystyrene sulfonate (PEDOT:PSS) as a charge-storage layer resulted in these stable devices. A significant decrease in the potential window of Δ E ≈ 2.5 V was achieved by using a metal grid on PET as the counter electrode. The operation of the electrochromic films is diffusion-controlled, and the diffusion coefficients ( Df) reflect their molecular densities. During these studies, we found that ClO4- is a suitable counterion of the lithium-based electrolytes for optimal ECD performance.