On Standardization and Evaluation of Continuous Glucose Monitoring Systems

Abstract

Continuous glucose monitoring (CGM) systems are often used to monitor blood glucose levels. Most commercially available CGM systems continuously measure glucose concentrations in the interstitial fluid of subcutaneous adipose tissue. However, there is currently no internationally accepted reference method for measuring interstitial fluid glucose, which is a prerequisite for metrological traceability of glucose measurements obtained using CGM. Since manufacturers do not provide information about the traceability chain and measurement uncertainty of their systems, CGM-derived glucose values cannot currently be adequately traced to standards or higher order reference measurement procedures. Additionally, the «mean absolute relative difference» (MARD) often used to describe the analytical performance of CGM systems is dependent on many factors. For example, the MARD can be significantly affected by the «lag time» between the change in blood glucose and interstitial glucose, especially at high rates of change in glucose. Finally, modern automated insulin delivery (ADI) systems with integrated CGM can automatically suspend or increase insulin infusion in response to current and/or predicted hypoglycemic and hyperglycemic phenomenon in children and adults with type 1 diabetes mellitus (T1DM). The purpose of the review is justification of the necessity to establish metrological traceability of glucose measurements with CGM systems, as well as a discussion of the analytical and clinical characteristics of CGM systems proposed by various professional communities. Based on the results of the review, it was concluded that it is necessary to 1) develop metrological support for glucose measurements performed using CGM systems, 2) solve the problems of ensuring the accessibility and usability of CGM systems by patients in real conditions.