Abstract
This paper reports an experimental investigation into mechanical behaviors and failure mechanisms of different joint methods for dissimilar materials, including adhesive joints, rivet joints, and hybrid joints with adhesive and rivet. In this study, a series of quasi-static tensile tests were conducted for different joint methods. The digital image correlation (DIC) technique was used to scrutinize the deformation and failure process in situ in real time. The failure modes were identified through macro-/microscopic analyses. The effects of rivet directions and filling enhancement on the joint behavior were characterized by means of experimental and theoretical methods. The results indicated that the hybrid connection exhibited the best mechanical characteristics among these three types of joints. Importantly, an interactive enhancement effect between the rivet and adhesive was identified in the hybrid joints. It was further found that the filling adhesive in a preformed hole of the substrate could better disperse the stress around it and effectively reduce the stress concentration near the hole edge. This paper provides some new insights into the design of different joint methods for dissimilar materials through a comparative study, which exhibits considerable potential and credibility for applying hybrid joints in engineering practice.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.