Abstract
In this study, a single screw extruder (SSE) was used to fabricate the poly (vinylidene fluoride) (PVDF) matrix inform of filament forthe material extrusion process in line with sustainable development goal (SDG) (with a special target on the industry, innovation, and infrastructure). For industrial use, the fabricated filament must be statistically controlled from a dimensional deviation viewpoint, so an effort has been made to ascertain the process capability of SSE based on the diameter of the filament. The study's findings indicate that the fabricated PVDF composite filaments are statistically controlled, as the process capability indices (Cp and Cpk) are > 1. The best setting for the SSE (for the minimum deviation) in the case of compositions A/B and D are a screw temperature of 220 °C and a screw speed of 7 rpm. For composition C the screw temperature was 230 °C and the screw speed of 7 rpm. The controlled dimensional deviations are also presented as international tolerance (IT) grades for assembly applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
