On plasma processing of polymers and the stability of the surface properties for enhanced adhesion to metals

Abstract

This paper deals with the plasma surface treatment of polymers in a low frequency bell jar reactor with non-symmetrical configuration of electrodes. The highly energetic character of this discharge due to its low excitation frequency and electrode configuration, as well as its small discharge volume makes it a very efficient and fast functionalization process. Amongst the different plasma gases used for the adhesion improvement of polypropylene to aluminum, ammonia has shown to be the most suitable one for this application. Since the NH and NH 2 radicals play an important role in the kinetics of nitrogen incorporation in polymers, mixtures of N 2 and H 2 were also used as possible substitutes for ammonia. The former are more environmentally friendly and easier to handle in industry than ammonia. The efficiency of nitrogen rich mixtures in the case of the second application, i.e. adhesion improvement of copper to fluoropolymers has been compared to that of ammonia which still shows faster nitrogen incorporation. The last part of this paper is devoted to the study of the energetic character of plasmas of mixtures of He+NH 3 by OES and electrical measurements in the whole range of composition of the two gases. The results show that an ammonia percentage ranging from 5 to 10% in plasmas of mixtures of He/NH 3 represents a transition between two different discharge regimes. Plasmas of mixtures of He+2% NH 3, characterized by highly energetic electrons, ions and probably metastables of helium give rise to enhanced adhesion of PP to aluminum which remains stable with time.