Abstract

This paper proposes a spatial three degrees of freedom (DOF) parallel kinematic machine enhanced by a passive leg and a web-based remote control system. First, the geometric model of the parallel kinematic machine is addressed. In the mechanism, a fourth kinematic link--a passive link connecting the base center to the moving platform center--is introduced. Each of the three parallel limbs is actuated by one prismatic joint, respectively. The additional link has three passive DOF, namely two rotations around x and y axes and one translation along z axis. With the existence of this link, the unwanted motion of the tool (located in the moving platform) is constrained. The fourth link also enhances the global stiffness of the structure and distributes the torque from machining. With the kinematic model, a web-based remote control approach is applied. The concept of the web-based remote manipulation approach is introduced and the principles behind the method are explored in detail. Finally, a remote manipulation is demonstrated to the proposed structure using web-based remote control concept.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.