On-orbit measurement of phased arrays in satellites by rotating element electric field vector method

Abstract

This paper discusses the measurement of the excitation amplitude and phase of each element antenna of phased arrays in satellite orbit. In a phased array, the excitation amplitude and the phase of each element antenna deviate from the desired values, due to the nearby satellite structure, the error of attachment to the satellite, and thermal deformation in the orbit. The errors in the amplitude and the phase must be known for beam scanning and the synthesis of various antenna patterns. The rotating element electric field vector method is useful in measuring the amplitude and the phase of phased arrays. In this method, the amplitude and the phase of the element antenna can be determined simply by varying the phase of the element antenna by a phase-shifter and measuring the amplitude change of the electric field as a result of composition by the array. This is suited to the measurement of phased arrays in satellite orbit, where direct measurement of the phase is difficult. In this study, the above method is used to measure the excitation amplitude and phase of the phased array installed on Engineering Test Satellite VI in orbit. Based on the measured phase, the phase is corrected to realize the designed value. The accuracy of the beam directivity is examined and the validity of the measurements is evaluated. © 1998 Scripta Technica. Electron Comm Jpn Pt 1, 81(1): 1–13, 1998