On-line fan blade damage detection using neural networks

Abstract

This paper presents a methodology for monitoring the on-line condition of axial-flow fan blades with the use of neural networks. In developing this methodology, the first stage was to utilise neural networks trained on features extracted from on-line blade vibration signals measured on an experimental test structure. Results from a stationary experimental modal analysis of the structure were used for identifying global blade mode shapes and their corresponding frequencies. These in turn were used to assist in identifying vibration-related features suitable for neural network training. The features were extracted from on-line blade vibration and strain signals which were measured using a number of sensors.The second stage in the development of the methodology entails utilising neural networks trained on numerical Frequency Response Function (FRF) features obtained from a Finite Element Model (FEM) of the test structure. Frequency domain features obtained from on-line experimental measurements were used to normalise the numerical FRF features prior to neural network training. Following training, the networks were tested using experimental frequency domain features. This approach makes it unnecessary to damage the structure in order to train the neural networks.The paper shows that it is possible to classify damage for several fan blades by using neural networks with on-line vibration measurements from sensors not necessarily installed on the damaged blades themselves. The significance of this is that it proves the possibility to perform on-line fan blade damage classification using less than one sensor per blade. Even more significant is the demonstration that an on-line damage detection system for a fan can be developed without having to damage the actual structure.