Abstract

PV fault conditions in photovoltaic (PV) systems reduce panel power performance and accelerate cell degradation. In this way, many research have recently turned to the diagnosis of PV generator to minimize the cost of the produced energy and ensure reliable power production. This paper proposes a new PV diagnosis system based on on-line Electrochemical Impedance Spectroscopy. This latter is used to estimate internal parameters of PV panel connected to a resistive load via a DC/DC boost converter. The Nyquist Diagram allows to plot and evaluate dynamic impedance response versus variable low frequency signal injected in conjunction with the high frequency system allowing to operate the PV in MPPT condition. The dynamic single diode model with a series resistance, a shunt resistance and a junction capacitance is used to design the PV model in MATLAB/Simulink. Simulations results are given for normal and for faulty operation whether in the PV panel or in the load. Referring to these results, it is concluded that the proposed diagnosis method allows to detect PV panel faults regardless of load variation.

Highlights

  • IntroductionPV systems have been largely integrated to product clean energy

  • In the last decennary, PV systems have been largely integrated to product clean energy

  • The process detailed in the previous flowchart is implemented to the studied PV system described by figure (1)

Read more

Summary

Introduction

PV systems have been largely integrated to product clean energy. In [12], the authors develop an error detection method for PV systems using power losses analysis and a supervising system based on including the measured environmental conditions. According to these works, many methods for fault detection and diagnosis have been investigated in order to solve this issue. A diagnosis method based on Electrochemical Impedance Spectroscopy EIS is proposed [13] This method is widely used in many fields such as faults detection in batteries and corrosion study. The conclusion and future works will be provided in the last section of this paper

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call