Abstract

Production of polyhydroxyalkanoates (PHA) has generated great interest as building blocks for bioplastic production. Their production using mixed microbial cultures represents an interesting alternative, since it enables the use of organic wastes as a carbon source. Feast/famine strategy is a common way to promote selection of microorganisms with PHA accumulation capacity. However, when using waste sources, changes in substrate concentration are expected, that may affect performance and efficiency of the process. This study showed how the dissolved oxygen level can be used for online control of the cycle time, ensuring that the desired feast/famine ratio is effectively applied. An operation strategy is presented and validated, using sequential batch reactors fed with acetate as the carbon source. Production of polyhydroxybutyrate (PHB) was studied, which is the expected type of PHA to be synthetized when using acetate as substrate. Two reactors were operated by applying the proposed control strategy, to provide F/F ratios of 0.2 and 0.6, respectively. A third reactor was operated with a fixed cycle time, for comparison purposes. Results showed that the reactor that operated at an F/F ratio of 0.6 promoted higher biomass productivity and PHB content, as a result of a better use of available time, preventing unnecessary long famine times. The application of the tested strategy is a simple a reliable way to promote a better performance of feast/famine-based bioreactors involving mixed microbial cultures for PHB production.

Highlights

  • The increasing use of plastics in packing and other applications has triggered its accumulation in lands and waters, generating diverse ecological and environmental problems [1]

  • This research proposes and validates a simple strategy for controlling sequential batch reactors (SBR) using the evolution of dissolved oxygen concentration to effectively apply the desired F/F ratio, independent of changes in feed concentration

  • Operation of R0.6 showed that control of F/F can be of great benefit for mixed microbial cultures (MMCs) for PHB production

Read more

Summary

Introduction

The increasing use of plastics in packing and other applications has triggered its accumulation in lands and waters, generating diverse ecological and environmental problems [1]. This has created increasing interest in producing biodegradable polymers suitable for the manufacture of thermoplastic materials, as an alternative to petroleum-based plastics. PHAs are bacterial polymers destined for energy storage. They are only produced by microorganisms that possess the enzymatic pool to transform carbon to polyester chains and store them in intracytoplasmic granules [2].

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call