Abstract
In this study, the tensile properties of epoxy adhesive with the inclusion of micro-scale perlite and sewage sludge ash (SSA) particles were investigated for glass-epoxy laminates adhesively bonded single-strap repairs. Particle fillers were incorporated in the epoxy resin as an additive material at different ratios by weight, namely, 5, 10, 15 wt% for perlite; 5, 10, 15 and 20 wt% for SSA as well as unfilled composites. Composite samples were weakened by opening a circular cutout at the center of them, and then repaired by the circular patches produced from the same material. The repairing performances of samples were explored for two different patch ratios (D/d = 2 and 3). Results indicated that the inclusion of perlite and SSA particles in the epoxy adhesive contributed to a significant increase in load carrying capacity at a weight content of 10 wt%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.