Oily wastewater treatment using mullite ceramic membrane

Abstract

Abstract This paper presents performance of a microfiltration (MF) ceramic membrane for treatment of oily wastewaters. Mullite MF membranes were synthesized from kaolin clay. The effects of different operating parameters such as pressure (0.5–4 bar), volumetric flow rate (0–2 m/s), temperature (15–55°C), oil concentration (250–3000 ppm) and salt concentration(0–200 g/l) on permeate flux (PF), fouling resistance (FR), fouling and rejection (R) were investigated. In order to determine the best operating conditions, 250–3000 ppm condensate gas in water emulsions were employed as synthetic feed. The rejection of total organic carbon (TOC) for the synthetic feeds was found to be more than 94%. The results show that by increasing temperature and pressure, the PF increases. Also, by increasing oil content and salt concentration, the membrane is fouled rapidly and the PF decreases. At low salt concentration (0–25 g/l), PF increases with increasing salt concentration, but at high salt concentration (25–200 g/l), i...