Abstract
A batch study was conducted to evaluate efficiencies of four types of biomaterials to remove oil from water. The oils used in the study were standard mineral oil, vegetable oil and cutting oil. Two fungal biomasses of Mucor rouxii and Absidia coerulea along with chitosan and walnut shell media were the biomaterials used. The study was carried out with an initial oil concentration of 200mg/L for 6h. Non-viable M. rouxii biomass was found to be more effective than A. coerulea biomass in removing oil from water. The study demonstrated that the removal efficiencies by M. rouxii for these oils were in the 77–93% range at a pH of 5.0. The adsorption capacities for standard mineral oil, vegetable oil and cutting oil were 77.2, 92.5, and 84mg/g of biomass, respectively. The adsorption capacities for various oils exhibited by M. rouxii biomass were less than those of chitosan and walnut shell media.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
