Abstract
In this research, impregnated oil palm trunks (OPT) and polymer composites were prepared from a combination of dried oil palm trunks with phenol formaldehyde (PF) and urea formaldehyde (UF) resin in different resin percentages using an impregnation method. Time of impregnation was a parameter used to control the percentage of resin content in the oil palm trunks. These studies investigated the effect of resin content and types of resin on the physical properties of impregnated OPT. Water absorption tests revealed that OPT polymer composite with 75% PF resin loading had increases of 21% and 26% for OPT polymer composites with 75% UF resin loading. The thickness swelling of OPT polymer composites with 75% PF resin loading exhibited the lowest value of 3.30% as compared with OPT polymer composite with 75% UF resin loading, which exhibited a value of 4.30%. The dimensional stability of the OPT polymer composites with the highest resin loading was slightly lower when compared to rubberwood. Scanning electron micrographs show that PF resin placement in OPT polymer composites was better, and resin penetration retained the original dried OPT structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
