Abstract
Ohmic contacts play a major role in the signal transfer between the semiconductor device and the external circuitry. One of the main technological issues to develop high-performance SiC-based devices is the control of metal/SiC contact properties to fabricate low resistance and high stability SiC Ohmic contacts to p-type SiC. This is mostly due to intrinsic SiC characteristics like large work function, low dopant activation for p-type materials and low hole mobility. These limits are even more emphasized in SiC JBS or MPS diodes, where Schottky and Ohmic contacts on the P doped regions embedded in the active area to improve surge ruggedness are usually formed by using the same metallization process. This naturally results either in a high Schottky barrier height in the Schottky contact with consequent increase of the conduction loss at low currents or in a poorly conductive Ohmic contact, leading to reduced IFSM capability. Therefore, the optimization and control of the process parameters like for example the P+ doping concentration peak underneath the metallization layer and the annealing process temperatures is crucial to obtain a good Ohmic contact and enhance the device´s robustness against surge current.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
