Ohmic Contact for Silicon Carbide by Carbon Nanotubes

Abstract

The electrical contact properties of silicon carbide (SiC) and carbon nanotubes (CNTs) were measured by conductive atomic force microscopy (C-AFM). A CNT forest was synthesized by SiC surface decomposition. Trenches, which electrically separate the conduction area, were fabricated using a focused ion beam (FIB) without a cover layer, and the resistance of each island was measured by C-AFM. From the dependence of the resistance on the CNT forest island size, the contact resistance between the CNTs and the SiC substrate was measured. By varying the dopant density in the SiC substrate, the Schottky barrier height was evaluated to be ~0.5 eV. This is slightly higher than a previously reported result obtained from a similar setup with a metal covering the CNT forest. We assumed that the damaged region existed in the islands, which is due to the trench formation by the FIB. The commensurate barrier height was obtained with the length of the damaged region assumed to be ~3 μm. Here, we could estimate the resistivity of a CNT/SiC interface without a cover layer. This indicates that a CNT forest on SiC is useful as a brief contact electrode.