Abstract
The objective of this experimental work was to assess the drop impact damage onWoven Glass Fibre Reinforced Polymer composite laminate through online method and offlinemethod. Online monitoring of drop impact damage was carried out by Acoustic Emission (AE)technique and AE signals during the drop impact test were captured. From the analysis of AEsignals, it was observed that as the impact energy increases the AE parameters such as counts,counts to peak, signal strength and root mean square (RMS) values also increase. Offlineassessment of impact damage on composite laminate was also observed by ultrasonic techniqueand it was inferred that ultrasonic parameters, namely amplitude and attenuation ratio weredecreased with increase in impact energy of test. But attenuation coefficient had an indirectrelationship with impact energy. During online/offline monitoring of composite laminate theAE/UT parameters which were obtained from real time monitoring are used to predict ImpactDamage Tolerance (IDT) using a separate trained artificial neural network model. Based on theIDT value of composite, the component should be continued in-service or replaced.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Iranian Journal of Science and Technology-Transactions of Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.