Abstract
AbstractIn this communication, we present a new processing method for obtaining oxide ceramic composites based on the ionotropic gelation technique. Nextel 610 fiber fabrics were infiltrated by an alumina‐zirconia suspension with a total solid content of 50 vol% and alginate as the binder. Subsequently, the suspension was slowly cross‐linked by adding Al3+ cations and transferred to a gel state. The gelled fabric layers could be easily cut, stacked and shaped, as well as joined to other ceramic materials and composites. Furthermore, the fiber content could be adjusted by pressing the layers together. In summary, the composites produced with this technique presented a very good fiber bundle infiltration, matrix with fine porosity and excellent mechanical properties. Nextel 610/alumina‐zirconia composites sintered at 1200°C for 1 hour showed bending strength of 306 MPa, interlaminar shear strength of 9.8 MPa and nominal fracture toughness of 13.6 MPa m0.5.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
