Abstract
Observations are reported for the columnar-to-equiaxed transition (CET) in stainless steel bars which have been solidified slowly and progressively in a horizontal configuration. For ferritic, austenitic, and ferritic/austenitic stainless steels containing more than 0.085 wt pct carbon, CETs occur at about the same distance from the start of solidification at a given growth rate. With increasing growth rates, the transition occurs closer to the start of solidification. At low carbon levels, near 0.02 wt pct carbon, the ferritic/austenitic steel is entirely columnar, in most cases. Adding nickel to the ferritic/austenitic steel, which makes the leading phase austenitic, produces a CET with small equiaxed grains. This suggests that different particles which are effective with austenitic growth become operative as nucleants. The transition from a columnar to an equiaxed structure occurs abruptly across the diameter of the sample. There is extensive fluid flow in the bulk melt, which produces shallow temperature gradients in the melt prior to the onset of solidification. The bulk melt flow does not appear to interact significantly with the melt in the interdendritic region or the melt immediately ahead of this region. The width of the solid/liquid region in the present experiments is observed to be between 10 and 20 mm, depending on the growth velocity and the distance from the start of solidification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have