Observations from Ground Improvement Using Vacuum Consolidation Method

Abstract

In the modern world of Civil Engineering, challenges arise during the various phases of construction, starting from the project development phase to the completion of the project. One of the main factors to be considered before commencing any infrastructure project is the foundation of where it is to be built. Without a strong foundation, it's not possible to proceed further to subsequent stages and in some cases, significant improvements may be required before starting the construction process. Although there are several different available methods for soil improvement in Civil Engineering, preloading using vacuum pressure with prefabricated vertical drains (Vacuum Consolidation Method) is one of the commonly applied techniques. Nowadays, it is widely used in countries having soft soil settlement problems. This paper presents the observations made from a soil improvement project using VCM including the site conditions and methodologies adopted during the process. The field data related to parameters such as pore pressure, settlement and shear strength improvement in natural soft clay have been presented and discussed. The degree of consolidation in the field has been back-calculated from settlement data and compared with values obtained from the 1-D consolidation equation. Field investigation tests, such as borehole tests and field vane shear tests, were performed before and after the soil improvement and it was found that the soft soil properties can be enhanced using vacuum consolidation without the use of any surcharge loading as well.