Observation of inverse reactive ion etching lag for silicon dioxide etching in inductively coupled plasmas

Abstract

The slowdown of the oxide etch rate with width of submicrometer structures is known as reactive ion etching (RIE) lag and has been explained by ion shadowing and differential charging of the sidewalls, among other effects [R. A. Gottscho and co-workers, J. Vac. Sci. Technol. B 10, 2133 (1992)]. Here we show for an inductively coupled high density plasma reactor working in the pressure regime from 6 to 20 mTorr that inverse RIE lag is primarily observed, i.e., the etch rates increase as the width of the microstructures decrease. Inverse RIE lag, which was first discussed by Vitkavage et al. [Tegal Plasma Proceedings Symposium, San Francisco, 1991 (unpublished)], may be explained by considering the neutral flux distribution at the structure bottom. The neutral flux has a stronger dependence on the aspect ratio than the ion flux due to its isotropic velocity distribution. The neutral flux distribution has been modeled and is consistent with etching profiles observed at high pressure.