OA034] Error detection sensitivity of a commercially available system for 3D plan verifications

Abstract

Purpose The complexity of the treatment techniques IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc Therapy) introduced the requirement of an individual plan verification. The latest development is 3D verification which allows evaluation in terms of 3D gamma values but also a judgment based on differences in dose distributions on individual patient CT data and in dose volume histograms. For a verification tool the error detection sensitivity is important. The purpose of this work is to evaluate the accuracy and the sensitivity of the gamma evaluation of the 3D verification software MobiusFx when a systematic error in one parameter is applied. The results are compared to an established 2D-measurement based method. Methods 11 IMRT and 11 VMAT plans were selected as reference plans. For every reference plan a systematic offset of 1 mm, 2 mm and 3 mm in the same direction was applied to the Multi-Leaf-Collimator (MLC) positions. All plans were irradiated and verified simultaneously with MobiusFx and MatriXX Evolution 2D array measurement. For both verification systems the applied dose distributions were evaluated using the gamma method based on the reference plans. In MobiusFx additionally the MLC position errors were evaluated. Results Regarding the gamma evaluation results, MobiusFx and MatriXX Evolution 2D measurements have almost the same sensitivity: The gamma evaluation of both systems detected shifts of 1 mm in VMAT plans and shifts of 2 mm and larger in IMRT plans. The information of the MLC position error provided by MobiusFx allows further to detect errors down to a shift of 1 mm in IMRT plans, giving an advantage over the MatriXX measurement. Conclusions MobiusFx shows a high error detection sensitivity, comparable to MatriXX Evolution. Through the gamma calculation and the MLC position error it is possible to detect errors down to a shift in MLC positions of 1 mm. It is recommended to inspect all the above parameters during plan verification.