Abstract
This work provides a comprehensive overview of various aspects of airfoil CFD simulations. The airflow around a 2D NACA 0012 airfoil at various angles of attack is simulated using the RANS SST turbulent flow model and compared to experimental data. The airfoil is then modified with a slotted flap and additionally the angle of the flap is altered. The flow model is subsequently coupled to a heat transfer model to compare the isothermal versus non-isothermal performance. The airfoil with the slotted flap shows increased CL and CD values compared to the standard NACA 0012. Larger flap angles further increase the CL and CD. The lift and drag coefficients show no difference in the non-isothermal model compared to the isothermal model, indicating the isothermal model is sufficient for this system. The 3D model without wingtips shows a similar CL to the 2D model as it effectively has an infinite span. Adding a wingtip reduces the lift coefficient, as the air can flow around the wingtip, increasing the pressure on top of the wing. Overall, these results match the behavior expected from wing theory well, showing how CFD can be effectively applied in the development and optimization of wings, flaps, and wingtips.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.